Sdz Mods

GLQuake port with MesaFX backend, with dual TMU support. -driver sources (SST1 and CVG support on IP32) https://github.com/sdz-mods/tdfx_irix-glide2x IRIX port (SST1 on IP32) https://github.com/sdz-mods/glide_irix-MesaFX IRIX port https://github.com/sdz-m

Quake2 ports with MesaFX and (newly written) miniGL backends, both with dual TMU support.-driver sources (SST1 and CVG support on IP32) https://github.com/sdz-mods/tdfx_irix-glide2x IRIX port (SST1 on IP32) https://github.com/sdz-mods/glide_irix-MesaFX IR

In-system programmer for the SGI O2 system PROM. It which allows writing/dumping the system PROM via USB. This can be done at any point, with the system on or off.Mechanically compatible with all O2 CPU modules. Installation instructions:-remove Dallas so

At the moment only SST1 (Voodoo1) is supported on IP32 (O2). Only tested on IRIX 6.5.30 with RM7000C CPU.-driver sources (SST1 and CVG support on IP32) https://github.com/sdz-mods/tdfx_irix-glide2x IRIX port (SST1 on IP32) https://github.com/sdz-mods/glid

Low profile S3 Savage4 Pro PCI 32MB card with VGA and HDMI(technically DVI over HDMI connector) outputs. Tested under W98 and XP, works fine. HDMI output is limited to 12801024. It's not necessary to use the BIOS from DFP cards (like I/O DATA or Number9)