Uplab

Tired of carrying a router just to SSH into your device? Me too. If you work with edge devices like Nvidia Jetson, Raspberry Pi, or the new Nvidia Spark, you know the struggle. You want a fast, reliable connection to your laptop for development and debugg

Goal: Use two NVMe drives in RAID 1 for the root filesystem "/" to increase reliability SD card (or eMMC) is used only for booting "/boot/firmware" 1. Install OS and Required Utilities Install the OS on the SD card or eMMC Start the system and wait for a

Not everyone knows that the Raspberry Pi CPU has a built-in Watchdog. It's basically a time bomb that will reboot the CPU if its timer is not reset.And the operating system, in case of normal operation, sends a reset command every preset time interval. It

With the release of CM5, it is now possible to double the speed of the PCIe bus on the Compute Blade when working with the Compute Module from Raspberry Pi.It's quite easy to do, and so far all the tests I've done show high stability of the solution. Comp

The firmware upgrade on Raspberry Pi CM5 at the moment (December 2024) is complicated by the fact that the available downloadable versions of RPIBOOT do not work with the BCM2712 processor. You have to build it yourself, but luckily, it's done in a few co

Apple is Apple. The power button for the new Mac mini on its bottom. I've come up with a solution for turning the Mac mini 2024 on or off without taking it off the table. One more thing. A solution for turning on your Mac mini simply by clicking on it. Th

I have converted the PoE+ HAT for Raspberry Pi 4 to a PoE+ HAT for Raspberry Pi 5I'll go into a little more detail in the thread.#raspberrypi #raspberrypi5 pic.twitter.com/lA4fAazGPj- Ivan Kuleshov (@Merocle) January 25, 2024 The first thing I did was to

Raspberry Pi 5 Peltier cooler (with custom heat pipe cooling system) A short introduction The project started two months before the final (not really, I'll tell you why not below) photo was published. Simply put, I wanted to do something cool with the Ras

KVM rack stand for Mac minis, KVMac16 In the first part of the article you can read about why this stand is needed, as well as the path traveled to the current version Assembly instructions List of components StarTech UNISLDSHF192 2U shelf About 1.2 kg Ul

Warm-up (FAQ) WHY?To install the Mac mini group to a remote data center and be able to control each of them. By control, I mean being able to reinstall the operating system, if necessary, completely. And why is that? For example, QA connects and tries to