2,292,754open jobs
145,640companies
270,928added this week
Browse all
Salary
≈ $70k – $129k per year (Estimated)
Location
In office (Lanham)
Seniority
Middle · 3+ years exp
Visa
H-1B filings in 12 months: 12 · green card filings: 3

Confirmed on the employer's own hiring board on Nov 16, 2026. First seen by Alion on Jul 13, 2026. AST SpaceMobile scores A on the Alion truth index.

Overview
Company
Impact
Profile match
Founded in 2017, AST SpaceMobile is a satellite communication company developing a global space-based cellular broadband network. Headquartered in Midland, Texas, United States, the enterprise designs and manufactures low-Earth orbit satellites engineered to connect directly with standard, unmodified smartphones. Through its innovative satellite constellation, it seeks to eliminate cellular coverage dead zones and provide seamless 4G and 5G connectivity worldwide.
Backed by Samsung Next

AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today’s five billion mobile subscribers and finally bring broadband to the billions who remain unconnected.

Position Overview:

The Mechanisms Flight Engineer is responsible for the verification, operational readiness, and flight execution support of spacecraft deployment and actuation systems. This role focuses on mechanisms represented within the flat sat environment, including deployment actuators, drive assemblies, hold-down and release mechanisms (HDRMs), and gimbaled systems.

This engineer will verify command and telemetry paths, motor drive performance, sensor feedback, and end-to-end mechanism functionality prior to flight. The role owns the execution and validation of flight operations procedures for deployment and actuation events, including commanding and monitoring mechanisms, validating timelines and mode transitions, rehearsing commissioning activities, and reproducing on-orbit conditions in the lab to support anomaly investigation and resolution.

The Mechanisms Flight Engineer serves as the critical link between mechanism hardware and control-system bring-up in the electronics lab and the successful execution of deployment and actuation events throughout the mission lifecycle.

Key Responsibilities:

  • Build, configure, and maintain the mechanism drive and control representation on the flat sat, including harness routing, connector integration, motor drivers, actuator electronics, release-device fire circuits, and position/feedback sensors.
  • Perform bring-up, functional checkout, and troubleshooting of mechanism drive electronics and control paths, including motors, position sensors, peripheral devices, and HDRM circuits.
  • Develop, execute, and maintain automated and manual procedures for mechanism functional verification, including deployment, actuation, and gimbal-pointing activities.
  • Create and utilize scripting and test automation tools to improve test repeatability, efficiency, and verification coverage.
  • Execute flight operations procedures for mechanism deployments and actuation events, including commanding mechanisms, monitoring telemetry, validating timelines, and verifying mode transitions.
  • Rehearse and validate commissioning, deployment, and on-orbit actuation events in the flat sat environment.
  • Reproduce on-orbit mechanism conditions in the laboratory to support anomaly investigation, troubleshooting, and resolution.
  • Verify mechanism electrical interfaces against ICDs, schematics, and engineering requirements, including continuity, pinout verification, power distribution, motor phases, sensor signals, and HDRM circuitry.
  • Instrument and monitor mechanism performance using laboratory test equipment including oscilloscopes, logic analyzers, DMMs, programmable power supplies, and data loggers.
  • Capture and analyze telemetry and test data, including motor current signatures, heater and RTD data, switch states, and deployment timing metrics to assess mechanism performance and health.
  • Support real-time mission operations during deployment and actuation activities by monitoring telemetry, executing procedures, and providing hardware-informed engineering support during critical mission events.
  • Maintain configuration control of flat sat hardware, software, and testbed builds to ensure accurate representation of flight configurations and document all deltas.
  • Collaborate closely with Mechanisms, Avionics, Software, Integration & Test, Systems Engineering, and Flight Operations teams to close verification activities and resolve technical issues.

Qualifications 

Education:

Bachelor's degree in electrical engineering, mechanical engineering, aerospace engineering, or a related engineering discipline.

Experience:

  • Minimum 3+ years of hands-on experience in spacecraft integration and test, flight hardware operations, mission operations, or related engineering disciplines involving mechanism control systems, actuators, or complex electromechanical systems.
  • Experience with electronics bring-up, mechanism actuation and control, and electrical troubleshooting using laboratory instrumentation.
  • Experience developing automated test procedures and scripts (Python preferred) for functional verification, integration testing, or operational validation.
  • Ability to read and interpret electrical schematics, wiring diagrams, interface control documents (ICDs), and engineering drawings.
  • Experience performing connector verification, harness validation, and electrical interface testing.

Preferred Qualifications:

  • Direct experience supporting spacecraft mechanisms, flat sat environments, spacecraft integration and test (I&T), or mission operations.
  • Experience commanding and monitoring deployment or actuation events through telemetry and command interfaces.
  • Experience with motor drive and actuator control systems, including brushed DC, brushless DC, and stepper motors, encoders, and closed-loop positioning systems.
  • Experience with spacecraft commissioning activities, deployment operations, sequence validation, timeline verification, or ground-segment interfaces.
  • Experience supporting anomaly investigations, root-cause analysis, and corrective action implementation.
  • Familiarity with spaceflight hardware development and operational readiness activities.

Soft Skills:

  • Strong systematic troubleshooting skills with the ability to isolate whether a fault is mechanical, electrical, firmware, software, or operational in nature and drive resolution to root cause.
  • Meticulous documentation practices and configuration management discipline.
  • Excellent written and verbal communication skills with the ability to work effectively across multidisciplinary teams.
  • Ability to exercise sound judgment and maintain composure during real-time deployment and actuation events where actions may be time-critical and irreversible.
  • Self-directed and proactive in a fast-paced, small-team environment.
  • Strong organizational skills with the ability to manage multiple priorities and deadlines.

Technology Stack:

  • Python and scripting languages for test automation and verification.
  • Exposure to embedded C/C++ and embedded systems development is a plus.
  • Laboratory instrumentation including oscilloscopes, logic analyzers, digital multimeters, programmable power supplies, and data loggers.
  • Configuration management and document-control systems such as Windchill, Arena, and Git.
  • Jira or equivalent issue-tracking tools.
  • Microsoft Office Suite.

Physical Requirements:

  • Ability to perform hands-on hardware operations in electronics laboratory and cleanroom environments for extended periods.
  • Ability to work with cabling, fine-pitch connectors, electronic assemblies, and precision flight hardware.
  • Compliance with ESD and contamination-control protocols.
  • Ability to use computers, engineering workstations, and laboratory instrumentation for extended periods.
  • Willingness to support occasional nights, weekends, and mission-critical operations associated with launch, commissioning, and on-orbit deployment activities.
  • Ability to lift and manipulate hardware, cabling, and test equipment as required for integration and test activities.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Free account
Stop reading job ads. Get the ones that fit.
One free account turns this page into a shortlist built around your stack, your level and your pay.
Match on every job. Stack, seniority, pay and location, scored against your profile.
2,292,754 open roles. Read straight off company career pages, refreshed every day.
Unlimited applications. Every one you send is tracked in one place, on-site or on a company board.
3 tailored CVs a month. Rewritten for the exact job you are applying to. Included free.
Create a free account Continue with Google
Free forever. No card. Under a minute.

Your match

How well do you fit this role?
Two answers are enough for a real match. No account needed.
Check my fit
Answers stay in this browser until you create an account.

Recommended for you based on this role

Industrial Engineering
Remote, many countries
Similar stack
Same company
Lanham
In office · 5+ years exp · Bachelor's Degree · Cupertino
Design
SolidWorks
Apply
In office · 3+ years exp · Fort Myers
Apply
In office · 2+ years exp · Georgetown
Apply
In office · 2+ years exp · High School Diploma · Society Hill
Analytics
Microsoft Excel
Apply
In office · 5+ years exp · Columbia
Apply
$12k – $17k per year (net) · Remote (EAEU) · Full-Time · Novosibirsk
Design
AutoCAD
Apply
$12k – $14k per year (net) · Remote (EAEU) · Full-Time · Moscow
Design
AutoCAD
Apply
Remote (EAEU) · Contractor · Moscow
Design
SolidWorks
AutoCAD
Apply
$86k – $138k per year · In office · Public Trust · 5+ years exp · High School Diploma · Lanham
Java
Java
Spring Boot
Databases
DynamoDB
DevOps
OpenShift
AWS
Kubernetes
AWS Lambda
Amazon EC2
Amazon S3
Analytics
Informatica
Management
Agile
Apply
Sales Associate 3 days ago
In office · High School Diploma · Lanham
Apply
In office · Full-Time · Bachelor's Degree · Lanham
Apply
$170k – $225k per year · Equity · In office · 3+ years exp · High School Diploma · Lanham
Apply
$95k – $162k per year · In office · Lanham
Apply
See all jobs
This is one of many
2,292,754 more open roles from verified company boards, updated every day.