2,300,357open jobs
145,988companies
269,708added this week
Browse all
Salary
$113k – $165k per year
Location
In office (Raleigh, Charlotte)
Seniority
Senior · 5+ years exp
Visa
No sponsorship (stated in the posting)

Confirmed on the employer's own hiring board on Nov 16, 2026. First seen by Alion on Nov 3, 2026. Eaton scores A on the Alion truth index.

Overview
Company
Impact
Profile match
Eaton is a power management company founded in 1911 as a truck axle maker and now incorporated in Dublin with operational headquarters in Beachwood, Ohio. Its largest business by far is electrical, supplying circuit breakers, switchgear, uninterruptible power supplies and distribution equipment, a portfolio that has become unusually valuable as data centre construction and grid electrification accelerate demand for power infrastructure. The group also builds aerospace hydraulic and fuel systems, electric vehicle powertrain components and vehicle drivetrain products, and sells the Brightlayer software suite that monitors and optimises the equipment it manufactures.

Eaton’s Corporate Sector division is currently seeking a Supplier Development Engineer - Lugs & Electrical Terminals. This position can sit out of one of the following locations: Beachwood OH, Charlotte NC, Jackson MI, Menomonee Falls WI, Moon Township PA, or Raleigh NC.

The expected annual salary range for this role is $113000 - $165000 a year.

Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.

What you’ll do:

The Supplier Development Engineer is responsible for developing supplier manufacturing capability, capacity, scalability, and operational readiness to support current and future business requirements.

You will lead structured supplier development activities to identify and close systemic manufacturing, process, capacity, and operational gaps. This role provides proactive supplier development support for business growth, new product launches, supplier transfers, capacity expansion, and strategic supplier initiatives.

You will partner with Supplier Quality, Supply Chain, Engineering, Operations, Centers of Excellence (COE), and suppliers to drive measurable and sustainable improvements in supplier capability and performance.

Essential Functions

Supplier Development & Capability Improvement

  • Lead supplier development activities to identify and close manufacturing, process, capacity, and operational gaps.
  • Establish development plans with defined actions, owners, timelines, and measurable outcomes.

Manufacturing & Process Capability

  • Assess supplier manufacturing processes and drive improvements using process capability analysis, Lean, structured problem solving, material flow, process controls, and advanced quality tools.
  • Evaluate manufacturing controls for electrical lugs, terminals, and connection components, including copper and aluminum materials, forming, machining, plating, termination, crimping, compression, fastening and torque, dimensional controls, mechanical strength, electrical performance and testing, traceability, validation, and change management.
  • Drive robust, repeatable, and compliant manufacturing processes.

Capacity & Scalability Readiness

  • Assess supplier capacity and production-rate readiness against current and future requirements.
  • Identify constraints and drive mitigation, recovery, or capacity expansion plans.

Growth, Launch & Transfer Readiness

  • Develop supplier readiness for new product introductions, supplier transfers, localization, volume growth, and capacity expansion.
  • Identify supplier risks and implement mitigation actions before they impact operations.

Technical Supplier Recovery

  • Lead supplier development activities when quality, delivery, or operational issues result from manufacturing, process, capacity, or systemic capability gaps.
  • Partner with Supplier Quality Engineering and cross-functional teams to implement sustainable corrective actions.

Supplier Assessment & APQP

  • Conduct supplier and risk-based assessments to evaluate manufacturing capability, process controls, capacity, scalability, and operational readiness.
  • Support APQP and supplier-readiness activities and drive actions to address identified gaps.

Continuous Improvement & Problem Solving

  • Coach suppliers in Lean, 8D, root-cause analysis, process capability, material management, auditing, and load and capacity planning.
  • Lead improvement activities to achieve sustainable supplier performance.

Cross-Functional Execution

  • Partner with Supplier Quality, Supply Chain, Engineering, Operations, COE, and other stakeholders to address supplier risks and critical business needs.

Verification & Sustainability

  • Establish measurable success criteria and verify development objectives and corrective actions are effective and sustained before closing activities.
  • Work directly with suppliers when quality, delivery, or business risks require corrective action and improvement

Qualifications:

Basicv (required) Qualifications

  • Bachelor’s degree in Engineering, Manufacturing, Quality, Supply Chain, or a related technical discipline from an accredited institution.
  • Minimum of 5 years of experience in Manufacturing Engineering, Supplier Development, Supplier Quality, Operations, Supply Chain, or a combination of these functions.
  • Minimum of 1 year of experience with electrical connection or current-carrying components, such as lugs, terminals, connectors, or bus connections.
  • Minimum of 1 year of experience with manufacturing processes or controls, including conductive materials, forming, machining, plating, termination, fastening, dimensional controls, testing, process validation, or traceability.
  • Minimum of 1 year of experience assessing manufacturing capability and/or leading supplier or manufacturing process improvement activities.
  • Minimum of 1 year of experience using APQP, PPAP, PFMEA, Control Plans, MSA, SPC, 8D, or other structured quality/problem-solving methodologies.
  • Minimum of 1 year of experience with capacity analysis, production-rate readiness, or load and capacity planning.
  • Must be able to travel up to 50%.
  • Must be legally authorized to work in the United States without company sponsorship, now or in the future.
  • No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of Beachwood, OH; Charlotte, NC; Jackson, MI; Menomonee Falls, WI; Moon Township, PA; or Raleigh, NC will be considered. Active-duty military members are exempt from this geographical limitation.

Preferred Qualifications

  • Lead Auditor qualification or certification.
  • Lean or Six Sigma certification.
  • Experience with electrical lugs, terminals, connectors, bus connections, or similar current-carrying components.
  • Experience with copper or aluminum conductive materials, forming, machining, plating, crimping, compression, fastening, or electrical testing.
  • Experience with supplier transfers, new product introductions (NPI), capacity expansion, localization, or industrialization.
  • Experience working with suppliers across multiple sites, regions, or countries.
  • Master’s degree in Engineering, Manufacturing, Quality, Supply Chain, Business, or a related discipline.

All positions may require participation in video and in-person interviews as part of the hiring process. All candidates will be evaluated based on job-related competencies, and all candidates’ privacy rights and data security will be protected in accordance with applicable laws.

We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws.

You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.

To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number.

We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Free account
Stop reading job ads. Get the ones that fit.
One free account turns this page into a shortlist built around your stack, your level and your pay.
Match on every job. Stack, seniority, pay and location, scored against your profile.
2,300,357 open roles. Read straight off company career pages, refreshed every day.
Unlimited applications. Every one you send is tracked in one place, on-site or on a company board.
3 tailored CVs a month. Rewritten for the exact job you are applying to. Included free.
Create a free account Continue with Google
Free forever. No card. Under a minute.

Your match

How well do you fit this role?
Two answers are enough for a real match. No account needed.
Check my fit
Answers stay in this browser until you create an account.

Recommended for you based on this role

Industrial Engineering
Remote, many countries
Similar stack
Same company
Raleigh
Sanitation Supervisor 2 months ago
In office · Full-Time · 3+ years exp · Wautoma
Life Sciences
GMP
Apply
In office · Full-Time · 3+ years exp · Wautoma
Apply
In office · Full-Time · 5+ years exp · Bachelor's Degree · Adell
Life Sciences
GMP
Apply
$138k – $207k per year · In office · Full-Time · 7+ years exp · Philadelphia · Englewood
Python
Go
Bash
DevOps
Rest API
Ansible
CI/CD
GitOps
Git
Configuration Management
Linux
Unix
TCP/IP
DNS
BGP
Apply
$54k – $60k per year · In office · Full-Time · 3+ years exp · High School Diploma · Bakersfield
DevOps
Windows
Analytics
Microsoft Excel
Management
Oracle ERP
Life Sciences
GMP
Apply
Remote (EAEU) · 5+ years exp · Yekaterinburg
Design
AutoCAD
Apply
Remote (EAEU) · 7+ years exp · Bachelor's Degree · Moscow
Design
AutoCAD
Apply
$14k per year · Remote (EAEU) · 2+ years exp · Moscow
Design
AutoCAD
Apply
$20k per year · Remote (EAEU) · Volgograd
Apply
$20k per year · Remote (EAEU) · Krasnodar
Apply
MEP Manager 1 day ago
In office · 10+ years exp · Bachelor's Degree · Raleigh
Life Sciences
GMP
Apply
Hybrid · Full-Time · Bachelor's Degree · Raleigh
Life Sciences
LIMS
MedTech
21 CFR Part 11
Apply
Hybrid · Raleigh
Apply
Podiatrist 1 day ago
In office · Raleigh
Apply
COOK (FULL TIME) 1 day ago
$38k – $42k per year · In office · Full-Time · Raleigh
Apply
See all jobs
This is one of many
2,300,357 more open roles from verified company boards, updated every day.