2,396,451open jobs
149,541companies
292,251added this week
Browse all
Location
In office (York)
Seniority
Middle · 4+ years exp

Confirmed on the employer's own hiring board on Nov 19, 2026. First seen by Alion on Nov 18, 2026. Ecore International scores A on the Alion truth index.

Overview
Company
Impact
Profile match
Ecore International makes products from recycled rubber, including flooring and surfacing materials, at plants in Pennsylvania, New York, Alabama and Texas. It hires production operators, maintenance technicians, territory sales managers, fleet maintenance technicians and a director of sourcing and procurement. The company is headquartered in Lancaster, Pennsylvania, United States.

Job Summary:   

This position is responsible for the overall operation of the Laminator Machine and supplying good, quality product with the ability to meet deadlines in a safe manner.  Additional responsibilities will include: assistance with creating SOP and other production related documentation, inventory data-entry and cross-training into other job functions as needed.  This position requires routine attendance to departmental, production, safety and Company meetings.  

Duties and Responsibilities:   

“E”ssential 

“S”econdary 

% of Time 

Description 

E 

40% 

Set-up, operate, troubleshoot and make necessary adjustments to the Laminator machine following established procedures and guidelines with minimal supervision to laminate material. 

Conduct a visual inspection and perform general preventive maintenance of the laminator  

Power on machine 

Gather all necessary materials 

Set-up machine per product specific set-up sheet 

Using computer station and work panel controls, select appropriate options to include adhesive, air chucks, splice complete, etc. Refer to SOP for step-by-step setup procedures for use of computer station and work panel controls. 

Feed/jog material and web through machine or splice if material is already on machine 

Go to adhesive area and place adhesive in front of IR’s 

Set temperature and monitor until it gets to the required temp 

Begin running machine 

Web bottom layer at IR station 

Turn nip “on” 

Increase speed and monitor tension at the IR station and cooling conveyor area 

Turn on waterjet and begin trimming 

Check tension on waterjet based on thickness of material 

Remove material from machine 

Stage rolls for put-away using appropriate equipment 

Once laminator process is complete, print production ID labels and place on material   

E 

30% 

Adhere to and follow all quality guidelines.  Continually check product for quality throughout the manufacturing process. 

E 

10% 

Operate fork truck to transport raw materials and finished products while adhering to all power industrial equipment rules and safety requirements  

E 

10% 

Maintain clean work environment by cleaning belt from adhesive, IR’s and work area as needed; maintain machine as required by changing blades as required and report any maintenance issues immediately to supervisor and maintenance department 

5% 

Utilize computer at workstation to login, enter/review production data and work orders as required 

E 

5% 

Cross-train into other job functions providing assistance as necessary within the department 

100%

Knowledge, Skills and Abilities Required:   

High School Diploma/GED required 

4 years of machine operator/manufacturing experience preferred; 12-months manufacturing or machine operating experience required; department experience preferred 

English fluency (read, write, speak); strong communication skills required (written/verbal)

Forklift experience preferred

Cross-training within department/location will be required as part of position

Proven ability to multitask in a stressful environment (dirty, confined spaces, strict timelines, etc.), attention to detail, and adapt to changing demands

Read and understand units of measure

Ability to perform basic math functions

Demonstrated comfort with data entry and basic computer skills; ERP experience preferred

Must be safety conscious and carry out work responsibilities in a safe manner

Must be able to work overtime to meet operational requirements

Able to safely perform related physical requirements/demands of the role 

Work Environment: 

The work environment characteristics below are representative of those that an employee encounters while performing the essential functions of the job. 

Manufacturing Environment:  This position may operate in a manufacturing setting with conditions of high-pressure air/steam/gas, hazardous gas/chemical fumes, extreme heat and temperature variations, loud noise, exposure to dangerous machinery, dirty work environment and/or exposure to dust (pigment).  The position is required to wear PPE including, but not limited to safety glasses, steel toe/composite boots and earplugs. 

Physical and Mental Demands: 

The demands described are representative but not all inclusive of those demands that must be met by an employee (with or without a reasonable accommodation) to successfully perform the essential functions of the job.  

Prolonged periods of standing, walking, using tools, and performing repetitive actions that entail frequent bending, reaching, climbing, stooping, lifting, pounding, pushing and/or pulling. Move throughout the work location to comply with safety requirements. 

Exert up to 130 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move object. 

Manual dexterity to move material and operate equipment.  

Communicate effectively (write, speak) with supervisors and others on performance and safety concerns.   

Adequate hearing ability to receive work instruction and to respond to changes in work environment. 

Attention to detail to complete work assignments. 

Time management to comply with scheduled work time and maintain productivity requirements.

Ability to understand and abide by safety policies and maintain a safe work environment. Ability to move throughout the work location to comply with safety requirements. 

The above are not intended to be an all-inclusive list of the duties, responsibilities and requirements of the job described. Rather, they are intended only to describe the general nature of the job. 

Free account
Stop reading job ads. Get the ones that fit.
One free account turns this page into a shortlist built around your stack, your level and your pay.
Match on every job. Stack, seniority, pay and location, scored against your profile.
2,396,451 open roles. Read straight off company career pages, refreshed every day.
Unlimited applications. Every one you send is tracked in one place, on-site or on a company board.
3 tailored CVs a month. Rewritten for the exact job you are applying to. Included free.
Create a free account Continue with Google
Free forever. No card. Under a minute.

Recommended for you based on this role

Field & Service
Remote, many countries
Similar stack
Same company
York
In office · Full-Time · 1+ year exp · High School Diploma · Alexandria
Apply
In office · Full-Time · 2+ years exp · High School Diploma · Camarillo
Apply
In office · Full-Time · 1+ year exp · High School Diploma · Lone Tree
Apply
In office · Full-Time · Fort Dodge
Apply
$91k – $107k per year · In office · Full-Time · 5+ years exp · Rialto
Apply
Remote (EAEU) · Full-Time · Moscow
Apply
$8.7k – $12k per year (net) · Remote (EAEU) · Full-Time · Voronezh
Apply
$36k – $48k per year · In office · 1+ year exp · High School Diploma · York
Apply
In office · 4+ years exp · High School Diploma · York
Apply
$38k per year · In office · 2+ years exp · High School Diploma · York
Apply
Equity · In office · Full-Time · 2+ years exp · York
Apply
Quality Technician 1 day ago
In office · 2+ years exp · High School Diploma · York
Chips/EDA
Statistical Process Control
MedTech
CAPA
Apply
See all jobs
This is one of many
2,396,451 more open roles from verified company boards, updated every day.