2,348,292open jobs
147,256companies
285,762added this week
Browse all
Location
In office (Tirupati)
Experience
3+ years exp

First seen by Alion on Nov 17, 2026.

Overview
Company
Impact
Profile match

As an Instrumentation Engineer, you will take end-to-end ownership of the instrumentation, data acquisition and control systems of our rocket engine and stage test facility - from sensor and wiring design to pre-test checkout and hot-fire data. You will work across propulsion, AIT, fluid systems and avionics teams, directly influencing test safety, data quality and how fast we turn around test campaigns.


Core Responsibilities:

  • Define the instrumentation list and channel plan: pressure, temperature (thermocouples/RTDs), flow, load cells, strain, vibration, level and valve position
  • Select and install sensors, transmitters and signal conditioning for cryogenic, high-pressure (300+ bar) and hot-fire environments
  • Own calibration of the full chain (sensor to DAQ) and its records
  • Solve noise, grounding and shielding issues to deliver clean, high-rate data
  • Design and build cable harnesses, field wiring and junction boxes between the test stand, bunker and control room
  • Lay out termination/marshalling panels, terminal blocks and patch panels
  • Select connectors (MIL-type circular, Lemo, M12, thermocouple) for vibration, cryo and outdoor conditions
  • Maintain wiring diagrams, interconnect drawings, cable schedules and I/O lists
  • Develop the facility DAQ and control software in LabVIEW on NI hardware (cDAQ/PXI/cRIO): acquisition, valve sequencing, live displays and logging
  • Implement automated test sequences, redlines and abort logic
  • Configure DewesoftX for high-speed and dynamic channels and synchronise it with the main DAQ
  • Deliver post-test data packages ready for propulsion analysis
  • Program and maintain PLCs for propellant feed, purge, pressurisation, cryo transfer and water systems
  • Build and run SCADA/HMI screens for remote operation, alarms and logging
  • Design relay logic, solenoid valve drivers, igniter/pyro firing circuits and emergency-stop chains
  • Own hardwired safety interlocks and their fail-safe states
  • Integrate instruments and controllers over Modbus RTU/TCP, Profibus/Profinet, EtherNet/IP, RS-232/485, CAN and OPC UA
  • Set up the facility network between DAQ, PLC, SCADA and video, with time synchronisation (PTP/IRIG-B/GPS)
  • Interface ground systems with vehicle and stage avionics for stage-level tests
  • Run pre-test checkout: continuity and insulation (megger) tests, end-to-end channel checks, valve and sequence dry runs
  • Write and execute checkout procedures and test readiness reviews
  • Sit on the test console during cold-flow and hot-fire tests
  • Lead troubleshooting of failed channels and anomalies


Required Skills:

  • LabVIEW - DAQ and control applications on NI hardware (DAQmx, state machines, TDMS logging)
  • Hands-on wiring, harnessing and panel building: terminations, crimping, connector selection
  • PLC programming (ladder/structured text) and SCADA/HMI configuration
  • Relay and interlock logic, solenoid drivers and E-stop circuits
  • Sensors and signal conditioning: pressure transducers, thermocouples/RTDs, flow meters, load cells, strain gauges, accelerometers
  • Industrial protocols: Modbus, RS-232/485, Profibus/Profinet or EtherNet/IP, CAN
  • Working knowledge of DewesoftX
  • Commissioning and checkout of instrumented systems in a test, plant or field environment


Qualifications:

  • B.E./B.Tech in Instrumentation, Electronics & Instrumentation, Electrical, Electronics or Mechatronics Engineering
  • Hands-on experience is valued more than academic credentials


Preferred:

  • Instrumentation and controls for rocket engine/stage test stands, aero-engine test beds, or cryogenic/high-pressure plants (ASU, LNG, oil & gas)
  • Experience at ISRO (LPSC/IPRC/SDSC), DRDO, HAL test beds or a private launch vehicle company
  • Hazardous-area work: intrinsic safety, Ex-rated equipment
  • Familiarity with IEC 61131-3, ISA-5.1 and IEC 61511 (SIS)
  • cRIO/FPGA in LabVIEW, or Python for post-processing

Skills

CAN, DAQmx, Ethernet/IP, HMI, LabVIEW, Modbus, NI, PLC, Profibus, Profinet, SCADA

Free account
Stop reading job ads. Get the ones that fit.
One free account turns this page into a shortlist built around your stack, your level and your pay.
Match on every job. Stack, seniority, pay and location, scored against your profile.
2,348,292 open roles. Read straight off company career pages, refreshed every day.
Unlimited applications. Every one you send is tracked in one place, on-site or on a company board.
3 tailored CVs a month. Rewritten for the exact job you are applying to. Included free.
Create a free account Continue with Google
Free forever. No card. Under a minute.

Your match

How well do you fit this role?
Two answers are enough for a real match. No account needed.
Check my fit
Answers stay in this browser until you create an account.

Recommended for you based on this role

Industrial Engineering
Similar stack
Same company
Tirupati
In office · 6+ years exp · Hyderabad
Design
SolidWorks
Apply
In office · 1+ year exp · Chennai
Design
SolidWorks
SpaceTech
FMEA
Apply
In office · 3+ years exp · Bengaluru
Python
C++
MATLAB
MATLAB
Simulink
Robotics
Model Predictive Control
MedTech
Design Controls
Apply
In office · 1+ year exp · Bengaluru
Python
C++
Fortran
Design
SolidWorks
SpaceTech
CATIA
FMEA
Apply
In office · Full-Time · 4+ years exp · Bachelor's Degree · India
Design
AutoCAD
Apply
In office · Tirupati
Apply
In office · Tirupati
Apply
In office · 2+ years exp · High School Diploma · Tirupati
Apply
In office · Tirupati
Apply
In office · 1+ year exp · High School Diploma · Tirupati
Apply
See all jobs
This is one of many
2,348,292 more open roles from verified company boards, updated every day.