Confirmed on the employer's own hiring board on Nov 22, 2026. First seen by Alion on Nov 17, 2026. Larsen & Toubro scores A on the Alion truth index.
PCB Layout Engineer - Power Electronics Converters (P17)
Role Summary
The PCB Layout Engineer is responsible for designing multi-layer PCB layouts for power electronics hardware such as AC-DC rectifiers, DC-DC converters, inverters, onboard/offboard chargers, SMPS, gate drivers, and control boards.
The role focuses on high-power, high-voltage, high-frequency layout, ensuring thermal performance, EMI/EMC compliance, safety isolation, and manufacturability.
Key Responsibilities
1. PCB Layout Design (High Voltage / High Current / High Frequency)
- Design multi-layer PCBs (2-12+ layers) for:
- Power stages (MOSFET/IGBT/SiC/GaN)
- Gate driver boards
- HV/LV sensing circuits
- Digital controller boards (MCU/DSP)
- Auxiliary power supplies
- Optimize layout for:
- Low loop inductance
- Controlled impedance traces
- Creepage & clearance for HV designs
- Short gate loops and Kelvin source routing
- High current copper thickness and pours
2. EMI/EMC-Optimized Layout
- Apply best practices for:
- Minimizing switching noise
- Grounding strategy (AGND/DGND/PGND separation)
- Shielding and filtering
- Common-mode noise control
- Differential pair routing (CAN, LVDS, Ethernet)
3. Thermal & Mechanical Considerations
- Design layouts supporting:
- Heat spreading
- Thermal relief, thermal vias
- Heatsink and busbar interface
- Component derating and spacing
-- component supports & PCB mounting considering vibration/shock
- Work with mechanical team for 3D integration.
4. Compliance & Safety Layout
- Ensure PCB meets:
- Creepage/clearance per IEC/UL standards
- Insulation requirements for HV (>800 Vdc)
- Automotive or industrial safety rules
- Design as per IPC/IEC standards
- Design isolation barriers with proper spacing and cut-outs.
5. Design for Manufacturability (DFM) & Assembly (DFA)
- Apply DFM/DFA rules with PCB fabs and assemblers.
- Prepare fabrication files Gerber/ODB++, Drill files, Stack-up, Mask files, Assembly drawings, Pick & place data
- Generate 3D models of the PCB
- Perform /coordinate Signal integrity and Power Integrity Analysis
6. Library & Documentation Management
- Create and maintain symbols, footprints, and 3D models.
- Maintain layout documentation, revision control, and release notes.
7. Cross-Functional Collaboration
- Work with:
- Power Electronics/ Hardware circuit designers
- Embedded/control engineers
- Mechanical engineers
- Manufacturing and quality teams
- Participate in design reviews (DR0/DR1/DR2/DFM review).
Required Skills & Qualifications
Technical Skills
- Strong experience in PCB layout for power electronics converters.
- Experience in layout of Control boards with DSP/microcontrollers/FPGA
- Expertise in:
- High-voltage (400V, 800V, 1500V)
- High-current (>100A)
- High-frequency SiC/GaN switching layouts
- Knowledge of EMI/EMC and grounding rules.
- Strong understanding of analog, digital, and mixed-signal routing.
- Understanding of PCB manufacturing constraints, soldering and assembly process
- Good understanding of IPE /IEC standards for PCB layout (IPC2220series, IPC7531 etc)
Ability to read schematics and understand converter topologies.
Tools
- Cadence Allegro / OrCAD
- Altium Designer
- Mentor Graphics (PADS/Xpedition)
- ECAD-MCAD integration (SolidWorks/Creo)
Experience
- PCB layout experience in AC-DC PFC, LLC/DC-DC converters, Inverters/traction converters, EV chargers / BESS modules and their controllers
- Experience with wide-bandgap SiC/MOSFET modules is an advantage.
Qualifications
- B.E / B.Tech in Electronics, Electrical, Mechatronics.
- Experience Levels 6-10 years with 5+ years in PCB layout
Preferred Experience
- Circuit Design experience.
- Hands-on knowledge of Kelvin source routing, Snubber loop optimization, Gate driver-power stage co-layout
- Knowledge of simulation tools (ANSYS SIwave, HyperLynx) preferred.
- Familiarity with safety standards (UL, IEC 61800, IEC 61000).

