2,457,523open jobs
149,978companies
315,253added this week
Browse all
Salary
$56k – $84k per year
Location
In office (Richmond)
Seniority
Senior · 5+ years exp
Visa
Sponsors visas in United States; no register of this country names it
Employment
Full-Time

Confirmed on the employer's own hiring board on Nov 21, 2026. First seen by Alion on Nov 19, 2026. MKS scores B on the Alion truth index.

Overview
Company
Impact
Profile match

MKS

MKS Instruments is an American company founded in 1961 that makes the instruments, subsystems and process control equipment inside semiconductor manufacturing tools, which means it sells mainly to the equipment makers rather than to chip fabs directly. Its portfolio covers vacuum and pressure measurement, gas and liquid delivery, power supplies, lasers and photonics, and, since the Atotech acquisition, the chemistry used in advanced packaging and printed circuit board plating. Headquartered in Andover, Massachusetts and listed on Nasdaq, it carries substantial debt from that acquisition and is exposed to the semiconductor equipment cycle at one remove.

A Day in Your Life at MKS:

As a Senior Manufacturing Engineer at Photon Control Inc., a subsidiary of MKS Instruments, Inc. you be responsible for offering technical and operational support to the Photon Control Production and Product Development Teams. The Senior Manufacturing Engineer will work in close co-operation with these cross-functional teams to ensure successful transfer and commercialization of New Products (NPI) into production, support existing production processes, new technology acquisitions and drive continuous improvement to enable the organization to meet delivery, lead time and quality objectives. In this role, you will report to the Senior Manager, Manufacturing Engineering.

You Will Make an Impact By:

  • Assisting in failure and root cause analysis investigations (NC/CA, FA, etc.) and, when required, executing effective, practical, controlled corrective action to eliminate future re-occurrence on the production floor.
  • Designing jigs, fixtures, and tooling using CAD (SolidWorks) to provide solutions to the production floor.
  • Supporting the Process Reliability team with equipment maintenance, verification, and calibration duties as required.
  • Writing and editing technical documentation to enable controlled implementation of any changes to release products following the established validation.
  • Applying ‘build-in quality’ tools in the NPI stage, including PFMEA, Control Plans, Process Flow, and product/process requirements.
  • Applying advanced problem-solving methodology such as DMAIC, 8D analysis, etc., to identify effective solutions to complex issues with unknown root causes.
  • Implementing and managing continuous improvement by highlighting deficiencies and recommending changes in training, working practices, business processes, and ERP systems to eliminate waste and enhance value.
  • Assisting and training operators in improvement methods such as kaizens, 5S, visual management, etc.
  • Leading Design for Manufacture (DFM) & Design for Assembly (DFA) efforts on engineering programs and providing feedback to the design team on improvement during design reviews.
  • Being able and willing to carry out any other duties and projects as required by the company.

Skills You Bring:

  • Bachelor’s or Master’s degree in Mechanical, Manufacturing, Mechatronics, Industrial Engineering, or a related field of applied science.
  • 5+ years of progressive experience in similar manufacturing or industrial engineering roles.
  • Lean Six Sigma training is ideal.
  • Proficiency in utilizing 'build-in quality' tools like FMEA, QCP, MSA, etc.
  • Competency in Solidworks or equivalent CAD software, including application of geometric dimensioning and tolerancing (GD&T).
  • Knowledge of PPAP/APQP and associated 'build-in quality' tools.
  • Strong analytical and problem-solving abilities with meticulous attention to detail.
  • Excellent communication and technical writing skills.
  • Adaptability to thrive in a dynamic, fast-paced environment where tasks and priorities may frequently change.

Preferred Skills:

  • Supervisory experience in electronics manufacturing (Copy Exact) environments.
  • Lean Six Sigma Green Belt certification.
  • Possession of a Professional Engineer (P.Eng.) or similar professional designation.

Physical Demands and Working Conditions:

  • Perform activities such as sitting, standing, or typing for extended periods of time.
  • Must be able to lift up to 50 lbs.
  • Regularly requires good manual dexterity and coordination.
  • Occasionally moves/positions objects up to 50 lbs.
  • Ability to remain in a stationary position for 40% of the time.
  • Frequently positions self to perform tasks and positions objects below, at, and above shoulder level.
  • Regularly requires manual dexterity and coordination of objects below, at and above shoulder level.
  • Must be able to communicate information and ideas so others will understand.
  • Must be able to exchange accurate information.
  • Operates in a professional office and/or laboratory/manufacturing environment.
  • Constantly operates a computer and other office productivity machinery.
  • Ability to observe documents and details at close range (within a few feet of the observer)
  • Dedication to safety to mitigate hazards, including handling mechanical and electrical hardware, high voltage, gas, water, and heat.
  • Noise level in the work environment is usually average.

Benefits:

  • Bonus Percentage Plan
  • RRSP Matching Program
  • Healthcare Including Medical, Dental and Vision, Life Insurance and AD&D, Medical Travel Insurance
  • Global Employee Assistance Program
  • Referral Program
  • Recognition Awards
  • Additional Flex Day Off with Spending Allowance
  • Transit Zone 1 Reimbursement
  • Active Social Committee Programs

Compensation:

Salary Pay Range: $80,000 - $120,000 per year. This range is a reasonable expectation of pay for this position, based on a wide range of factors including qualifications, experience, education, training, operational and business needs and other considerations.

Globally, our policy is to recruit individuals from wide and diverse backgrounds. However, certain positions require access to controlled goods and technologies subject to various export control regulations. Applicants for these positions may be limited (by, for example, their countries of citizenship, country of origin, or immigration status) where required by law or governmental contact, and/or employment made contingent upon the issuance of appropriate governmental licensing.

MKS Inc. and its affiliates and subsidiaries (“MKS”) is an affirmative action and equal opportunity employer: diverse candidates are encouraged to apply. We win as a team and are committed to recruiting and hiring qualified applicants regardless of race, color, national origin, sex (including pregnancy and pregnancy-related conditions), religion, age, ancestry, physical or mental disability or handicap, marital status, membership in the uniformed services, veteran status, sexual orientation, gender identity or expression, genetic information, or any other category protected by applicable law. Hiring decisions are based on merit, qualifications and business needs. We conduct background checks and drug screens, in accordance with applicable law and company policies.MKS is generally only hiring candidates who reside in states where we are registered to do business.

MKS is committed to working with and providing reasonable accommodations to qualified individuals with disabilities. If you need a reasonable accommodation during the application or interview process due to a disability, please contact us at: [email protected].

If applying for a specific job, please include the requisition number (ex: RXXXX), the title and location of the role

Free account
Stop reading job ads. Get the ones that fit.
One free account turns this page into a shortlist built around your stack, your level and your pay.
Match on every job. Stack, seniority, pay and location, scored against your profile.
2,457,523 open roles. Read straight off company career pages, refreshed every day.
Unlimited applications. Every one you send is tracked in one place, on-site or on a company board.
3 tailored CVs a month. Rewritten for the exact job you are applying to. Included free.
Create a free account Continue with Google
Free forever. No card. Under a minute.

Your match

How well do you fit this role?
Two answers are enough for a real match. No account needed.
Check my fit
Answers stay in this browser until you create an account.

Recommended for you based on this role

Engineering
Similar stack
Same company
Richmond
$38k – $58k per year · In office · Full-Time · 5+ years exp · Port Moody
Apply
Mine Manager 2 days ago
In office · Full-Time · 3+ years exp · Canada
Apply
Area Safety Manager 4 hours ago
In office · Full-Time · 7+ years exp · Calgary
Apply
Planning Supervisor 2 days ago
$42k – $49k per year · Hybrid · Full-Time · 4+ years exp · PhD · Toronto
Apply
Quality Inspector 7 hours ago
$53k – $78k per year · Hybrid · 3+ years exp · Toronto
Apply
BIM Lead 1 day ago
In office · 5+ years exp · Bachelor's Degree · Richmond
Apply
PT- Supervisor 1 day ago
$22k – $38k per year · In office · Part-Time · High School Diploma · Richmond
Apply
$75k – $99k per year · In office · Secret · Full-Time · 3+ years exp · Bachelor's Degree · Richmond
SpaceTech
AS9100
MedTech
Verification & Validation
Apply
In office · 1+ year exp · High School Diploma · Richmond
Apply
In office · Full-Time · 10+ years exp · Richmond
Marketing
Salesforce
HubSpot
Marketo
Apply
See all jobs
This is one of many
2,457,523 more open roles from verified company boards, updated every day.