2,290,588open jobs
145,421companies
272,071added this week
Browse all
Location
In office (Bastrop)
Seniority
Junior · 1+ year exp

Confirmed on the employer's own hiring board on Nov 16, 2026. First seen by Alion on Nov 6, 2026. SpaceX scores A on the Alion truth index.

Overview
Company
Impact
Profile match
SpaceX is an American aerospace manufacturer and launch services provider founded by Elon Musk in 2002 with the goal of making life multiplanetary. It developed the reusable Falcon 9, now by far the most flown orbital rocket in the world, the Dragon capsule that carries NASA astronauts to the International Space Station, and Starship, the fully reusable super-heavy vehicle intended for lunar and Mars missions. The company also operates Starlink, a satellite constellation of thousands of spacecraft providing broadband to consumers, aircraft, ships and militaries, which has become its largest source of revenue.

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

MECHANICAL ENGINEER, INSOURCE MANUFACTURING (STARLINK)  

The Insource Manufacturing team is responsible for designing, building, and qualifying custom equipment and automation systems to enable high-volume production of Starlink products. As a Mechanical Engineer in this group, you will take end-to-end ownership of critical manufacturing equipment and material handling systems. This role requires a detail-oriented engineer who is passionate about designing robust mechanical and automation systems, optimizing existing equipment, and developing novel solutions that push the boundaries of high-volume manufacturing while minimizing risk and maximizing efficiency in our state-of-the-art Starlink factory. 

RESPONSIBILITIES:  

  • Own manufacturing subsystems and equipment from conceptual design through fabrication, commissioning, and high-volume production ramp 
  • Develop design criteria, collaborate on requirements with cross-functional teams, and drive system-level optimization 
  • Perform failure modes and effects analysis (FMEA), reliability modeling, and stress testing to predict and mitigate potential failures and improve overall equipment effectiveness (OEE) 
  • Design and develop production equipment including structures, mechanisms, robot end effectors, automation systems, and material handling solutions 
  • Uptime Optimization: Monitor and track equipment performance metrics using data analytics; identify bottlenecks and downtime causes, then implement preventive and predictive maintenance strategies to maximize operational availability 
  • Evaluate and select equipment suppliers and vendors based on reliability, performance, and business needs; oversee installation, commissioning, and ongoing performance of both internally designed and vendor-supplied equipment 
  • Demonstrate extreme ownership of projects through their entire lifecycle while balancing multiple initiatives in a fast-paced environment 
  • Collaborate closely with design, manufacturing, and test teams to develop products and production processes in parallel 
  • Solve complex, open-ended problems with an emphasis on speed of execution, efficiency, and scalability 

BASIC QUALIFICATIONS:  

  • Bachelor’s degree in mechanical, manufacturing, materials, or other engineering discipline 
  • 1+ years of experience professional experience with mechanical design, analysis, testing, or manufacturing (internship experience is applicable) 
  • 1+ years of experience with CAD and FEA software packages 

PREFERRED SKILLS AND EXPERIENCE:  

  • Experience with custom machine design including electromechanical systems, end-of-arm tooling, motors, actuators, linear rails, bearings, and lifting/rigging 
  • Proficient in 3D CAD (Siemens NX preferred) and Teamcenter 
  • Solid understanding and application of GD&T, mechanical engineering fundamentals, structural analysis, and failure modes of complex mechanical systems 
  • Prior ownership of a complex component or assembly from initial design through production ramp 
  • Experience applying common manufacturing processes (welding, machining, assembly, inspection) and designing for manufacturability 
  • Hands-on experience with mills, lathes, manual and CNC machines 
  • Experience with FEA, structural hand calculations, and sizing of mechanical components 
  • Self-motivated with strong organizational, written, and oral communication skills 

ADDITIONAL REQUIREMENTS:  

  • Willingness to travel to other SpaceX sites and/or vendors for significant/extended periods of time (~25% travel normally, more during urgent manufacturing and test campaigns) 
  • Ability to lift up to 25Ibs unassisted 
  • Standing/walking for long periods of time 
  • Ability to work long hours and weekends as necessary to support critical milestones 

ITAR REQUIREMENTS:

  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.  

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to  [email protected]. 

Free account
Stop reading job ads. Get the ones that fit.
One free account turns this page into a shortlist built around your stack, your level and your pay.
Match on every job. Stack, seniority, pay and location, scored against your profile.
2,290,588 open roles. Read straight off company career pages, refreshed every day.
Unlimited applications. Every one you send is tracked in one place, on-site or on a company board.
3 tailored CVs a month. Rewritten for the exact job you are applying to. Included free.
Create a free account Continue with Google
Free forever. No card. Under a minute.

Your match

How well do you fit this role?
Two answers are enough for a real match. No account needed.
Check my fit
Answers stay in this browser until you create an account.

Recommended for you based on this role

Industrial Engineering
Remote, many countries
Similar stack
Same company
Bastrop
Process Engineer II 1 hour ago
Equity · In office · Full-Time · 2+ years exp · Master's Degree · Charlotte · Raleigh
SAS
Databases
Snowflake
AI/ML
Hadoop
Apply
Equity · In office · Full-Time · 3+ years exp · High School Diploma · Hubbard
DevOps
AWS
Apply
Controls Engineer 2 hours ago
$80k – $105k per year · In office · Full-Time · 3+ years exp · United States
Python
SQL
IoT
MQTT
OPC UA
Apply
Process Engineer 2 hours ago
In office · Full-Time · 2+ years exp · High School Diploma · Dayton
Apply
In office · Full-Time · 1+ year exp · Grand Prairie
Apply
$12k – $17k per year (net) · Remote (EAEU) · Full-Time · Novosibirsk
Design
AutoCAD
Apply
$12k – $14k per year (net) · Remote (EAEU) · Full-Time · Moscow
Design
AutoCAD
Apply
Remote (EAEU) · Contractor · Moscow
Design
SolidWorks
AutoCAD
Apply
$115k – $135k per year · In office · Nationals only · 5+ years exp · Bachelor's Degree · Woodridge
Design
SolidWorks
SpaceTech
GD&T
FMEA
Apply
In office · Nationals only · Full-Time · 1+ year exp · Bachelor's Degree · Woodridge
Design
AutoCAD
SpaceTech
FMEA
Apply
In office · Full-Time · 5+ years exp · Bachelor's Degree · Lithonia
DevOps
Windows
SpaceTech
FMEA
Apply
Quality Engineer I 2 days ago
In office · Full-Time · Bachelor's Degree · Ireland
Chips/EDA
Statistical Process Control
SpaceTech
GD&T
FMEA
Life Sciences
GMP
Design of Experiments
MedTech
ISO 13485
ISO 14971
21 CFR Part 820
Design Controls
CAPA
Apply
In office · Full-Time · Bachelor's Degree · Cascina
Chips/EDA
Statistical Process Control
SpaceTech
GD&T
FMEA
Apply
$115k – $155k per year · Equity · In office · Nationals only · 5+ years exp · High School Diploma · Hawthorne
Apply
$135k – $220k per year · Equity · In office · Nationals only · 5+ years exp · Bachelor's Degree · Redmond
SpaceTech
Siemens NX
Nastran
Femap
ANSYS
Apply
Equity · In office · Nationals only · 5+ years exp · Bachelor's Degree · Hawthorne
DevOps
AWS
Chips/EDA
Electron Microscopy (SEM/TEM)
Apply
$135k – $215k per year · Equity · In office · Nationals only · 5+ years exp · Bachelor's Degree · Hawthorne
Python
SQL
Apply
$100k – $130k per year · Equity · In office · Nationals only · 1+ year exp · Bachelor's Degree · Hawthorne
Python
SQL
Apply
In office · Nationals only · 5+ years exp · Bachelor's Degree · Bastrop
Python
SQL
Apply
Hybrid · Nationals only · Bachelor's Degree · Bastrop
Analytics
Tableau
Power BI
Looker
Microsoft Excel
Apply
Hybrid · Nationals only · Bachelor's Degree · Bastrop
Analytics
Tableau
Power BI
Looker
Microsoft Excel
Apply
In office · 12+ years exp · Bachelor's Degree · Bastrop
Apply
In office · Part-Time · Bastrop
Apply
See all jobs
This is one of many
2,290,588 more open roles from verified company boards, updated every day.