Contract Datacabling Technician

Linx Networks Limited is a registered Limited liability company in Nigeria, we partners with most IT vendors. we are a channel partner of HP, DELL, CISCO NETAPP etc. we sell and supplies IT/Networking Infrastructure.Cisco Networking Equipment, Dell/HP servers, We are an indegenous IT company in Nigeria, our core specialty has always been infrastructure deployment, Core IT Support and Maintenance.

We are recruiting to fill the position below:

Job Title: Contract Datacabling Technician

Location: Warri, Delta
Employment Type: Contract
Project: Access Control System Installation and Commissioning

Position Overview

• The technician is expected to demonstrate practical experience in electronic security systems, access control hardware, structured cabling, electrical installations, and troubleshooting.
• The successful candidate must be disciplined, safety-conscious, detail-oriented, and capable of delivering assigned technical tasks within the agreed project timeline and quality standards established by Linx Networks Ltd.
• The successful candidate will be responsible for the installation, configuration, testing, commissioning, and handover of access control equipment and related infrastructure at the designated project site.
• Linx Networks Limited is seeking to engage a competent, experienced, and technically proficient Access Control Technician on a project-contract basis for an access control installation project in Warri, Delta State.

Key Responsibilities
Access Control System Installation:

• Install access control panels, controllers, power supply units, backup batteries, and other system components.
• Install electromagnetic locks, electric strikes, exit buttons, door contacts, break-glass units, and associated door hardware.
• Install and configure access control devices, including biometric readers, RFID card readers, fingerprint terminals, PIN/keypad readers, and other designated access control equipment.
• Ensure all installations comply with the approved project design and technical specifications.
• Ensure proper mounting, positioning, alignment, and secure installation of all equipment.
• Install and terminate cables between access control devices, controllers, doors, and network infrastructure.

Structured Cabling and Electrical Works:

• Maintain neat, organised, and professional cable management.
• Coordinate with other technical personnel where installation requires interfacing with existing electrical or network infrastructure.
• Ensure proper power connections and polarity for access control devices.
• Carry out cable routing, trunking, conduit installation, and cable dressing where required.
• Identify and rectify cable faults, loose connections, short circuits, and other electrical issues.
• Terminate, label, and test all cables appropriately.

System Configuration and Programming:

• Configure door access parameters, access permissions, user credentials, and time schedules where applicable.
• Assist with integrating access control devices with the designated management software.
• Configure access control panels and associated devices.
• Configure communication between controllers, readers, and the central management platform.
• Assist with controller addressing, network configuration, and device communication.
• Ensure that all installed devices communicate correctly with the central system.

Testing, Troubleshooting and Commissioning:

• Conduct final system checks to ensure that all equipment operates according to project specifications.
• Test door locking and unlocking mechanisms.
• Identify and resolve installation and configuration faults.
• Verify RFID, fingerprint, PIN, QR code, or other credential authentication functions as applicable.
• Conduct functional tests on all installed access control devices.
• Report unresolved technical issues to the Project Manager or Technical Lead.
• Test exit buttons, emergency releases, door sensors, and alarm functions.

Project Documentation and Reporting:

• Participate in project handover and provide necessary technical explanations to the client's representatives.
• Maintain records of materials and equipment received, installed, or returned.
• Assist in preparing system testing and commissioning reports.
• Provide daily progress reports to the assigned Project Manager or Technical Lead.
• Provide installation photographs and relevant technical documentation.
• Report shortages, damaged equipment, and additional material requirements immediately.
• Document installed equipment, device locations, and cable routes where required.

Site Coordination and Professional Conduct:

• Maintain professionalism when interacting with the client, facility representatives, and other contractors.
• Ensure that no unauthorised changes are made to the approved project design or scope.
• Follow all instructions issued by the Project Manager or authorised Technical Lead.
• Protect client property, installed equipment, and project materials.
• Work closely with the Linx Networks Limited project team and other appointed contractors.
• Maintain a clean and organised work environment.

Qualifications and Experience
The ideal candidate should possess:

• Good understanding of electrical wiring, structured cabling, and basic networking.
• Good troubleshooting and problem-solving skills.
• OND, HND, B.Sc., or relevant technical certification in Electrical/Electronic Engineering, Computer Engineering, Telecommunications, Information Technology, or a related discipline. Equivalent practical experience may be considered.
• Ability to work independently and within a project team.
• 2–3 years of practical experience in access control installation and implementation.
• Demonstrable experience installing biometric access control systems, RFID readers, electromagnetic locks, access control panels, and related devices.
• Ability to read and interpret installation drawings, wiring diagrams, and technical specifications.
• Experience configuring access control controllers and management software.

Technical Skills Required:
The candidate should demonstrate practical knowledge of:

• Door contacts and access control accessories.
• Biometric access control systems.
• Electromagnetic locks and electric strikes.
• Exit buttons and emergency door release systems.
• Structured cabling, cable termination, and testing.
• Access control panels and door controllers.
• Power supply installation and backup battery connections.
• Access control software configuration and device integration.
• RFID and proximity card readers.
• Fault diagnosis, system testing, and commissioning.
• TCP/IP networking and basic IP configuration.
• Knowledge of ANPR, QR-based access control, turnstiles, boom barriers, and cloud-based access control systems will be an added advantage.

Project Deliverables:
The contracted technician will be expected to deliver the following:

• Successful configuration and communication of installed devices.
• Submission of equipment installation and testing records.
• Submission of installation progress reports and relevant photographs.
• Completion of all assigned tasks within the approved project schedule.
• Proper installation and termination of all associated cabling.
• Complete installation of assigned access control equipment.
• Functional testing of all installed doors and access control components.
• Participation in final commissioning and client handover.
• Rectification of installation-related defects identified during testing.

Tools and Equipments:
The technician is expected to have access to basic personal installation tools, including:

• Digital multimeter.
• Laptop for device configuration, where required.
• Wire stripper and crimping tools.
• Measuring tape and spirit level.
• Drilling machine and appropriate drill bits.
• Linx Networks Limited will clarify which specialised tools, project equipment, and installation materials will be provided by the company.
• Safety boots, hand gloves, and other appropriate personal protective equipment.
• Screwdriver and precision tool sets.
• Cable tester/network tester.

Health, Safety and Site Requirements:
The technician shall:

• Maintain proper housekeeping at the project site.
• Comply with all applicable workplace health and safety requirements.
• Ensure that tools and materials are handled safely.
• Obtain approval before carrying out work that may affect existing electrical, network, or security infrastructure.
• Observe electrical safety procedures when working with power supplies and electrical connections.
• Use appropriate personal protective equipment during installation.
• Avoid unsafe work practices and report potential hazards immediately.

Contractual Expectations and Conditions:
The successful candidate shall:

• Ensure all assigned responsibilities are completed to the satisfaction of the company's authorised project representative.
• Maintain confidentiality regarding the company's business, client information, project specifications, system configurations, passwords, and other sensitive information.
• Work according to the project schedule and instructions from Linx Networks Ltd.
• Resume at the project site on the agreed mobilisation date.
• Not disclose project information, photographs, drawings, or technical documentation to unauthorised persons.
• Not remove, transfer, or use project materials for personal purposes without approval.
• Be available for the agreed project duration in Warri, Delta State.
• Report any project challenges, delays, equipment damage, or material shortages promptly.
• Correct installation defects attributable to their workmanship within the agreed defect rectification period, at no additional labour cost.
• Not negotiate additional project costs or make commercial commitments to the client without written authorisation from Linx Networks Ltd.

Performance and Quality Expectations:
The technician's performance will be evaluated based on:

• Quality and neatness of installation.
• Ability to meet agreed project milestones.
• Compliance with safety and confidentiality requirements.
• Compliance with approved installation specifications.
• Accuracy of project documentation and reporting.
• Any substandard installation, unauthorised modification, negligence, or failure to follow approved technical instructions may result in corrective action or termination of the engagement in accordance with the contract terms.
• Effective troubleshooting and fault resolution.
• Professional conduct and teamwork.
• Technical accuracy and functionality of installed systems.

Confidentiality and Intellectual Property:

• Not reproduce or distribute project documentation without written authorisation.
• Keep all client and company information confidential.
• Return all company-issued equipment, documents, access cards, and other materials upon completion or termination of the engagement.
• All project drawings, technical designs, configurations, software credentials, installation procedures, documentation, and other materials provided by Linx Networks Ltd shall remain the company's or its client's property, as applicable.
  The technician shall:
• Not use client information or project access credentials for unauthorised purposes.
• These obligations shall survive the conclusion of the contract.

Reporting and Supervision:

• All project-related activities, technical decisions, material requests, scope changes, and client instructions must be communicated through the designated project reporting structure.
• The contracted technician shall report directly to the assigned Project Manager or Technical Lead of Linx Networks Limited.
• The technician shall not independently approve variations, additional costs, or changes to the agreed project scope.

Remuneration and Engagement Terms

• The engagement shall be on a project-based contract arrangement.

The following terms shall be agreed and documented before commencement:

• Accommodation: To be agreed before mobilisation.
• Work Location: Warri, Delta State.
• Contract Fee: To be communicated and agreed with the successful candidate.
• Transportation/Mobilisation: To be agreed before commencement.
• Feeding/Local Logistics: To be agreed before commencement.
• Project Extension: Any extension beyond the agreed project duration must receive prior approval from Linx Networks Limited.
• Engagement Duration: Based on the approved project implementation schedule.
• The technician shall not be considered a permanent employee of Linx Networks Limited by virtue of this project-specific engagement.
• Payment Schedule: As stipulated in the signed contract agreement and subject to satisfactory completion of agreed milestones.

How to Apply
Interested and qualified candidates should send their Applications to: [email protected] using "Contract Access Control Technician – Warri Project" as the subject of the email.

Note

Interested candidates should submit:

• Current location and availability for mobilisation to Warri, Delta State.
• Relevant technical certifications, where available.
• Brief description of previous access control installation projects handled.
• Updated Curriculum Vitae (CV).
• References or evidence of previous installation work, where available.
• Expected project contract fee.
• Only shortlisted candidates will be contacted for further assessment and engagement discussions.

Application Deadline: 19th November, 2026.